{"product_id":"audioquest-1m-nrg-tornado-source-cable-iec13-usa-braided","title":"AudioQuest 1m NRG Tornado Source Cable IEC13 Usa Braided (Demo)","description":"\u003ch3\u003eIdeally Suited to a Wide Range of Source Components.\u003c\/h3\u003e\n\u003cp\u003eTornado Source Power Cable takes advantage of AudioQuest's premier technologies and materials, including Ground Noise-Dissipation Technology, 72 VDC Dielectric-Bias System with Radio Frequency Trap, High Purity Conductors consisting of Perfect-Surface Copper (PSC) and Perfect-Surface Copper + (PSC+), ZERO (No) Characteristic Impedance (50Hz – 1MHz), Directionally Controlled Conductors, and Hanging-Silver Red-Copper Plugs.\u003c\/p\u003e\n\u003cp\u003eTornado Source and other Storm Series Source power cables are optimized for use with low-to-moderate current-consuming audio\/video source components and computer peripherals. The smaller conductors and enhanced Noise-Dissipation topology were specifically designed to yield the greatest possible level of performance from source audio\/video components.\u003c\/p\u003e\n\u003ch4\u003eGround Noise-Dissipation Technology\u003c\/h4\u003e\n\u003cp\u003eAC Ground wires protect from current-wiring faults and act as antennas. Thus, they are subject to induced radio frequency (RF) noise. This RF noise bypasses component power supplies and is typically coupled directly into a system’s most sensitive audio-video circuits. AudioQuest’s patented Ground-Noise Dissipation greatly reduces this distortion, yielding unprecedented noise dissipation across the widest bandwidth (range) of radio frequencies possible. Our unique circuit topology utilizes a common-mode phase-cancelling array, in concert with proprietary dielectric materials which provide additional differential linear filtering.\u003c\/p\u003e\n\u003ch4\u003eDielectric-Bi, as a System with Radio Frequency Trap\u003c\/h4\u003e\n\u003cp\u003eAll insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, dielectric involvement (absorption and non-linear release of energy) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for very time-sensitive multi-octave audio. The inclusion of an RF Trap (developed for AudioQuest’s Niagara Series of power products), ensures that radio frequency noise will not be induced into the signal conductors from the DBS field elements.\u003c\/p\u003e\n\u003ch4\u003eHigh Purity Conductors - Perfect-Surface Copper (PSC) And Perfect-Surface Copper + (PSC+)\u003c\/h4\u003e\n\u003cp\u003eA carefully finessed combination of solid high-purity Perfect-Surface Copper (PSC) and extreme high-purity Perfect-Surface Copper + (PSC+) conductors prevent strand interaction, a major source of ear-fatiguing transient prevent distortion. The astonishingly ear-fatiguing Perfect-Surface Copper eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N, and other premium coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.\u003c\/p\u003e\n\u003ch4\u003eDirectionally Controlled Conductors\u003c\/h4\u003e\n\u003cp\u003eAll drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation but also indicate non-symmetrical attachment of shield and GND to optimize full-system performance.\u003c\/p\u003e\n\u003ch4\u003eAudioQuest Storm Series AC Power Cables\u003c\/h4\u003e\n\u003cp\u003eAlternating Current (AC) is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today's high-resolution audio-video components. AC noise is present at the utility source and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and circuit ground. This creates distortion and low-level signal losses via the \"masking effect.\" Further, power amplifiers can require immense reserves of transient current for their power supplies to react to and then stabilize during dynamic audio passages. Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-redactor-tag=\"strong\"\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAudioQuest Tornado Source AC power cable is not appropriate for use with AC power conditioners, power regenerators, AC isolation transformers, AC battery backup devices, as well as any power amplifier, powered subwoofer, powered loudspeaker, powered receiver, or integrated amplifier (whether tube, solid state, or digital switching). These products will require greater RMS and transient current capacity. In extreme instances, they could suffer diminished performance and\/or present an electrical danger by exceeding the AudioQuest Hurricane\/Source AC power cable’s maximum current capacity. For those applications, we highly recommend selecting AudioQuest’s Hurricane\/High-Current AC power cable.\u003c\/p\u003e\n\u003cp\u003eFeatures Tech notes...\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-Z \/ Noise-Dissipation 3-Pole AC Power Cable\u003c\/li\u003e\n\u003cli\u003eHigh Purity Conductors - Perfect-Surface Copper (PSC) And Perfect-Surface Copper + (PSC+)\u003c\/li\u003e\n\u003cli\u003eOptimized for Source Components\u003c\/li\u003e\n\u003cli\u003eGround Noise-Dissipation Technology\u003c\/li\u003e\n\u003cli\u003e72 VDC Dielectric-Bias System with Radio Frequency Trap\u003c\/li\u003e\n\u003cli\u003eZERO (No) Characteristic Impedance (50Hz – 1MHz)\u003c\/li\u003e\n\u003cli\u003eDirectionally Controlled Conductors\u003c\/li\u003e\n\u003cli\u003eHanging-Silver Red-Copper Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":47699504070910,"sku":null,"price":750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/4156\/7486\/files\/3333238782_ad280ca0-bd08-486c-9b52-efa63e897bdd.jpg?v=1773342371","url":"https:\/\/sunnyaudiovideo.com\/products\/audioquest-1m-nrg-tornado-source-cable-iec13-usa-braided","provider":"Sunny Components Inc.","version":"1.0","type":"link"}